Spindle Hose Mount
Routing dust collection from your machine is a critical part of any setup. Whether you're directing the hose to a ceiling mount, to the top of an enclosure, or just to the edge of the machine, a secondary vertical attachment point at the spindle could be helpful. This mount comes in two sizes, 65mm or 80mm on one side. It is designed to work with a 2.5" hose.
NOTE:
This print is often used in combination with the Flexible Ceiling Hose Mount
Requires 2xM4 20mm screws - Inserts can be used
3D Print Library License
- This file and design are owned by Carbide 3D.
- You may use this file for personal use.
- You may print and sell these commercially as long as your product page links back to this page.
- You may not sell or redistribute the file.
- These files are provided as-is, without warranty or support.